RTS ORDERS SHIP IN 1-3 BUSINESS DAYS

Transfer Instructions

Thank you so much for trusting us with your screen print transfer order!

Our screen print transfers must be pressed with a heat press.

We recommend following the below steps to ensure proper adhesion of our original formula transfers:

  1. Set heat press to 325°
  2. Pre-press the garment for 3-5 seconds
  3. Place transfer (design side down) on the garment
  4. Press for 7-10 seconds with heavy pressure
  5. Peel while hot, but slowly to ensure complete adhesion.  If the plastisol ink is lifting, re-cover and re-press for another 7-10 seconds.

We recommend following the below steps to ensure proper adhesion of our high heat soft formula transfers:

  1. Set heat press to 350° (NOTE: each press varies! Your press may need to be set as high as 375)
  2. Pre-press the garment for 3-5 seconds
  3. Place transfer (design side down) on the garment
  4. Press for 7-10 seconds with heavy pressure
  5. Peel while hot, but slowly to ensure complete adhesion.  If the plastisol ink is lifting, re-cover and re-press for another 7-10 seconds.

*Garment must not be washed or worn within 24 hours of being pressed.  

*We always recommend washing inside out and in cold water, as well as drying on low heat, also inside out.

If you have any questions or experience any challenges, please email us at supper@dapperdesigns.store and we will be happy to assist you as soon as possible.

Thank you for joining us on this journey & supporting our small shop!

xo,

Erika

Owner | Dapper Designs